Three-Phase Solar & Battery Storage | For Installers and Project Buyers

5-20 kW Three-Phase Hybrid Inverters

Sunways STH-5K~20KTL-LT Series

Build your three-phase solar and battery project around the Sunways STH-LT series. Choose from 5-20 kW models with 2, 3 or 4 MPPTs, depending on model. The series supports up to 10 inverters in parallel for off-grid operation and 2× backup overload for 10 seconds under the specified operating conditions.

  • Three-phase hybrid design
  • 40-60 V battery voltage range
  • 2-4 MPPTs, depending on model
  • Up to 10 inverters in parallel for off-grid operation
  • 2× backup overload for 10 seconds
  • IP66 protection

STH-5~20KTL-LT

Compare STH-LT Models

Compare rated output, MPPTs, battery inputs and maximum battery charge/discharge current by model. Use these differences to shortlist an inverter for your PV array, battery configuration and intended loads.

Model Rated Grid
Output
MPPTs Battery
Inputs
Maximum Battery
Charge/Discharge
Current (A)
Weight
STH-5KTL-LT 5 kW 2 1 120 44.5 kg
STH-6KTL-LT 6 kW 2 1 140 44.5 kg
STH-8KTL-LT 8 kW 3 1 180 46.5 kg
STH-10KTL-LT 10 kW 3 1 215 46.5 kg
STH-12KTL-LT 12 kW 4 2 140/140 47.5 kg
STH-15KTL-LT 15 kW 4 2 160/160 47.5 kg
STH-20KTL-LT 20 kW 4 2 215/215 47.5 kg

Current values are shown in the model specification format. Confirm the battery configuration and communication requirements for the selected model.

Key Features for Three-Phase Storage Design

PV Tracking Matched to the Model

Choose from 2, 3 or 4 MPPTs according to inverter model. The datasheet lists a maximum PV input current of 20 A per input. Check module current, string voltage and the complete input configuration before finalising the PV design.

Low-Voltage Battery Architecture

The STH-LT range specifies a 40-60 V battery voltage range and CAN battery communication. Provide the battery model, BMS information and required configuration when requesting a compatibility review.

2× Backup Overload for 10 Seconds

Support short-duration backup loads with an overload capability of 2× the rated load for 10 seconds. The datasheet also lists a UPS switching time below 10 ms. Peak overload operation is subject to the documented PV power and operating conditions; select loads using the model-specific output limits.

Expand Off-Grid Systems With Up to 10 Inverters

The STH-LT series supports up to 10 inverters in parallel for off-grid operation. Share the proposed system layout, battery configuration and load requirements when planning a multi-inverter project.

IP66 Protection

The series is specified with IP66 protection. Use the product's installation documentation to check mounting and operating requirements for the site.

Technical Specifications

Parameter STH-LT Series
Starting voltage 130 V
Maximum DC input voltage 1,000 V
MPPT voltage range 160–850 V
Maximum PV input current 20 A per listed input
Battery voltage range 40–60 V
Battery communication CAN
UPS switching time <10 ms
Maximum efficiency 97.6%
Protection degree IP66
Off-grid parallel operation Up to 10 inverters
Backup overload capability 2× rated load for 10 seconds, subject to documented operating conditions
Weight 44.5 kg (5/6 kW) 46.5 kg (8/10 kW) 47.5 kg (12/15/20 kW)

Refer to the current model datasheet for the full PV, battery and AC limits. Confirm the product version and installation-country requirements when specifying a project or placing an order.

Downloads and Product Documents

Download the STH-LT datasheet and request installation documentation for your product version. Check certificates by exact model and installation country rather than assuming that one document covers every model or market.

Three-Phase Hybrid Inverter FAQs

Q1. What does low voltage refer to on this page?

It refers to the battery side of this hybrid inverter range. The datasheet specifies a 40-60 V battery voltage range. Check the AC-side requirements separately for the selected model and installation country.

No. The 5 kW and 6 kW models have 2 MPPTs; the 8 kW and 10 kW models have 3; the 12 kW, 15 kW and 20 kW models have 4.

Power rating is one selection factor. Review the supply configuration, PV string limits, battery requirements and intended backup loads before choosing the model.

No. The model datasheet lists these as separate specifications. Use the starting voltage and the MPPT operating range for their respective checks when reviewing the PV design.

The series supports up to 10 inverters in parallel for off-grid operation. Request the installation documentation for the selected models, product version and system layout.

It is a short-duration backup overload capability, not a continuous output rating. Check the model-specific output limits and the documented PV power and operating conditions when selecting backup loads.

The 5 kW and 6 kW models weigh 44.5 kg; the 8 kW and 10 kW models weigh 46.5 kg; and the 12 kW, 15 kW and 20 kW models weigh 47.5 kg.

Send the inverter model, product version, installation country, battery model and BMS information. Include the proposed battery configuration and system layout.

Include the required models, quantity and delivery destination. If the order is for a particular project, also provide the supply configuration, PV array, battery and backup-load requirements.

Request a Three-Phase Hybrid Inverter Quote

Share the STH-LT models you are considering, the project country and required quantity. Add PV, battery and backup-load information so your enquiry supports a model-specific discussion.

Related Products

STH-4K~12KTL-HT-P

STH-4K~12KTL-HT-P

4~12kW | Three Phase | 2 MPPTs

STH-40K~80KTL-HT

STH-40K~80KTL-HT

40~80kW | Three Phase | 5 MPPTs 

STH-3K~8KTL-LS-LV

STH-3K~8KTL-LS-LV

3~8kW | Single Phase | 1/2 MPPTs

Scan to follow Sunways on WeChat

Scan the QR code to follow Sunways on WeChat and get the latest updates on solar inverter products, energy storage solutions, project cases and company news.

Sunways Wechat QR

Get a Solar Solution Quote

Tell us your project needs. Sunways will help you find the right solar inverter, battery or energy storage solution.

Your Contact Information
Project & Product Interest
Inquiry Details